Toolbox talks by trade
10 field-ready talks for marine & waterfront construction work. Each one now includes a fuller leader guide, real stop-work triggers, useful crew questions and a two-page printable PDF with sign-off.
Today's topic is Working Near Water & Personal Flotation Devices. Focus on falls into water, drowning and difficult rescue, then walk the crew through the actual setup, work area and stop-work conditions.
Dock & Pier Walking Surfaces can go wrong fast when wet surfaces, gaps and edge exposure. Use the job in front of you to show the crew where the exposure is and how it will be controlled.
Tidal Changes & Access Routes can go wrong fast when changing elevation, slippery access and trapped routes. Use the job in front of you to show the crew where the exposure is and how it will be controlled.
Take a few minutes before the task to cover Marine Equipment & Pinch Points. The main concern is lines, moving equipment and pinch/crush zones, so make sure everyone sees the exposure and knows the plan before work begins.
Use today's Fall Rescue Planning Near Water talk as a quick crew check on delayed rescue, currents and cold-water exposure. Talk through the real conditions, the controls in place and what would make the crew stop and reset the job.
Use this leader guide before gangway access & boarding work to review the real setup, the controls that need to be in place, and the conditions that should stop the task.
Use this leader guide before barge deck housekeeping & trip hazards work to review the real setup, the controls that need to be in place, and the conditions that should stop the task.
Use this leader guide before life rings, rescue skiffs & water rescue equipment work to review the real setup, the controls that need to be in place, and the conditions that should stop the task.
Use this leader guide before crane lifts from barges & floating platforms work to review the real setup, the controls that need to be in place, and the conditions that should stop the task.
Use this leader guide before mooring lines & snap-back zones work to review the real setup, the controls that need to be in place, and the conditions that should stop the task.
