Router & Shaper Safety
Router & Shaper Safety can go wrong fast when high-speed cutters, kickback and hand placement. Use the job in front of you to show the crew where the exposure is and how it will be controlled.
Toolbox talks by trade
Carpentry & Millwork toolbox talks.
14 field-ready talks for carpentry & millwork work. Each one now includes a fuller leader guide, real stop-work triggers, useful crew questions and a two-page printable PDF with sign-off.
Jointer & Planer Safety
Take a few minutes before the task to cover Jointer & Planer Safety. The main concern is rotating cutter heads, stock kickback and pinch points, so make sure everyone sees the exposure and knows the plan before work begins.
Band Saw Safety
Band Saw Safety can go wrong fast when blade contact, blade breakage and unstable stock. Use the job in front of you to show the crew where the exposure is and how it will be controlled.
Reciprocating & Jig Saw Safety
Reciprocating & Jig Saw Safety can go wrong fast when blade exposure, hidden utilities and loss of control. Use the job in front of you to show the crew where the exposure is and how it will be controlled.
Pneumatic Stapler Safety
Take a few minutes before the task to cover Pneumatic Stapler Safety. The main concern is unintended discharge and puncture injuries, so make sure everyone sees the exposure and knows the plan before work begins.
Cabinet Installation & Wall Anchoring
Before work starts, use this Cabinet Installation & Wall Anchoring talk to cover falling cabinets, hidden utilities and awkward lifting. Point out the equipment, work zone and controls the crew will rely on today.
Handling Plywood, Sheet Goods & Countertops
Use today's Handling Plywood, Sheet Goods & Countertops talk as a quick crew check on strains, sharp edges and blocked vision. Talk through the real conditions, the controls in place and what would make the crew stop and reset the job.
Wood Dust Collection & Combustible Dust Awareness
Take a few minutes before the task to cover Wood Dust Collection & Combustible Dust Awareness. The main concern is airborne dust, respiratory exposure and combustible accumulation, so make sure everyone sees the exposure and knows the plan before work begins.
Adhesives, Solvents & Wood Finishes
Keep this Adhesives, Solvents & Wood Finishes talk tied to the job in front of the crew. Cover vapors, skin exposure and ignition hazards, then confirm the setup and who is responsible for the key controls.
Door Installation Pinch & Crush Hazards
Door Installation Pinch & Crush Hazards can go wrong fast when heavy doors, finger injuries and unstable temporary setups. Use the job in front of you to show the crew where the exposure is and how it will be controlled.
Track Saw & Guide Rail Safety
Use this leader guide before track saw & guide rail safety work to review the real setup, the controls that need to be in place, and the conditions that should stop the task.
Oscillating Multi-Tool Safety
Use this leader guide before oscillating multi-tool safety work to review the real setup, the controls that need to be in place, and the conditions that should stop the task.
Large Cabinet, Pantry & Tall Unit Handling
Use this leader guide before large cabinet, pantry & tall unit handling work to review the real setup, the controls that need to be in place, and the conditions that should stop the task.
Finish Nailing Near Hidden Utilities
Use this leader guide before finish nailing near hidden utilities work to review the real setup, the controls that need to be in place, and the conditions that should stop the task.